Mainline Dynolog Dynamometers

Welcome to the home of Mainline DynoLog Dynamometers, or "Mainline Dyno" for short ! Our systems represent a distinct, and unsurpassed, step forward in dynamometer technology...


Read More

Twitter Stream

Featured News
Monday, 28 November 2016 16:56

PRI 2016

The motorsport business event of the year, where the international racing industry converge on Indianapoulis for three days is the Performance Racing Industry trade show being held at the Indiana Convention Center 8 - 10 December 2016.
This year will be our largest trade display, located in the "Yellow Hall" at booth numbers 5271 & 5373. Our booths will feature our very popular ProHub Chassis Dynamometers which are the most effective "in chassis" tuning solution on the market for extreme performance vehicles and drag racing cars. 

Thursday, 24 November 2016 11:43

CORNELL DYNO TECHNOLOGY

Mainline DynoLog Dynamometers have recently installed an All-Wheel Drive Chassis Dynamometer and a Heavy Vehicle (Bogie Drive) Chassis Dynamometer at Cornell Fuel Injection & Turbo Service, in their new state of the art premises, located in Sunshine West in Melbourne.

The AWD chassis dynamometer is a heavier duty version of the popular AWD1200 premium model, with larger than standard rollers, and upgraded roller shafts to handle higher vehicle weights. The unit can be used for RWD, FWD, AWD & 4WD light vehicle applications and medium trucks and buses.

Friday, 02 September 2016 09:50

HALTECH TECHNICAL SEMINARS - MALAYSIA

 To coincide with the Haltech ECU Training Seminars, our Mainline Dyno Team will be on hand to provide technical support and demonstrations of our Smart Dyno Technology before, during, and after this event ( 23rd to 26th September)

Please contact us if you would like to make an appointment for a dyno demonstration.

For more information and booking details for the technical training seminars, visit :  Haltech Technical Seminars - Malaysia

 

 

Wednesday, 13 April 2016 20:00

SUPERBIKES DYNO

We're excited to announce that we will be running our MCD400L Series Motorcycle Chassis Dyno at Sydney Motorsport Park for the Australian Superbike Championship Round 3 this weekend. It wont just be there on show either. A dyno operator will be on hand to put select spectators motorbikes to the test throughout the weekend. Racers are encouraged to bring their bikes down for a run as well, whether you want full power figures, or just want to double check the air/fuel ratio, the dyno is available to all competitors.

Wednesday, 06 April 2016 09:43

STREET BEAST ON PROHUB DYNO


DOC from the popular TV show "Street Outlaws", and Ben Strader from EFI UNiversity, talk about hooking up the "Street Beast" to the ProHub Chassis Dyno, and the advantages of tuning extreme performance vehicles without any wheel slip issues.

The Street Beast has been converted to Electronic Fuel Injection, and fitted with a Haltech ECU and will soon be tuned at EFI University by Ben Strader.

 

Friday, 15 January 2016 15:04

TUNED TO PERFECTION

 

JD Racing discusses how their Mainline DynoLog Dynamometers Motorcycle Chassis Dyno has been a key part of their team's racing achievements.

Daniel Falzon was the the Australian Supersport Champion in 2013 and 2014, and claimed 2nd place in the 2015 ASBK - Australian Superbikes Championship, in his maiden year on their Yamaha Superbike. The JD Racing team exclusively use a Mainline Motorcycle Chassis Dyno to tune all of their race bikes.

Monday, 14 December 2015 09:43

V8 UTE RACING SERIES DYNO TECH TALK

The Mainline Dyno Team scrutineering the performance levels of the V8 Utes competing in the Australia Ute Racing Series
Monday, 14 December 2015 09:23

DANIEL FALZON 2016 PROMO VIDEO

Daniel Falzon's 2016 Promotional Video

Thursday, 26 November 2015 12:52

STEWARTS PROGRESSIVE START

A new car brings a lot of challenges, but Michael Stewart’s hard-fought second-place finish in last Saturday night’s second Speedcar Super Series round at Brisbane’s Archerfield Speedway in Queensland proved that his best is yet to come in the 2015-16 season.

After two seasons of running a Stealth chassis, the 20-year-old racer from Canberra (ACT) switched to the CP3 chassis designed by New Zealand-based Tim Clark, and Stewart’s opening three outings of the season in the car have certainly been encouraging.

Monday, 16 November 2015 14:26

SYDNEY 500

The Mainline Dyno Team will be onsite at the Sydney 500 at Eastern Creek (4th - 6th December 2015) to check the performance levels of the Australian V8 Ute Racing utes. 

Apart from scrutineering the performance levels of the V8 Utes competing in the series, the ProHub Chassis Dyno will be available to V8 Ute Teams for general troubleshooting purposes. 

Look out for the “Mainline Dyno” branded number plates that will be attached front and back of each ute going around the circuit !

Page 1 of 6

Like Us On Facebook

Upcoming Events

 PRI2016 Logo
Indiana Convention Center - USA
Feature Products - ProHub 3000 & 5000 Chassis Dynamometers